Designed for use with an alternator
type Shovelhead or Big Twin Evolution
engine.
Includes Manufacturer's Statement of Origin
Softail
Features:
1" O.D. Rear Axle with flush mounted Cover Plates.
Welded-in Transmission Mounting
Plate.
Rubber Mounted Oil Tank with center
fill oil cap hole.
Fork Stop Plate with two different
mounting positions for your choice of
turning radiuses (requires flat type
lower Fork Bracket).
1 3/4" O.D. Backbone made form .188" wall
DOM steel.
1 3/8" O.D. Engine Cradle made from .120" wall
DOM steel.
1 3/8" O.D. Rear Fork is made from .188" DOM
steel.
Adjustable width Fender Struts
allow for 13 1/4" through
14 1/4" wide Fenders.
The upright position of the battery
box keeps the top of the battery well
below the seat rails for easier seat
fabrication.
2 1/2" dropped Seat Rails.
TIG welded construction.
Can be used with a full size rear
belt or chain.
Required Components:
Right Side Drive Softail type Transmission
1/2" Offset Transmission Pulley
1/2" wide Spacer and Pushrod kit for the clutch
actuator
12" wide right side drive Rear Wheel designed
for a 1" O.D. Axle
Custom left side mounted Rear Brake designed for a
1" O.D. Axle or custom right side brake/drive
combo
Custom flat type Lower Fork Bracket suitable to mount
the Fork Stop Plate to
1986/1999 Softail style Forward Controls
136 tooth 1 1/2" wide Rear Belt with 70 tooth
Pulley or a 133 tooth 1 1/2" wide Rear Belt with
a 65 tooth Pulley
Custom fabricated Seat and Gas Tank Mount
1989/1999 Softail Shocks
Softail 1984/1999 Rear Fork Pivot Bearings
Rigid Features:
1" O.D. Rear Axle with flush mounted Cover Plates.
Welded-in Transmission Mounting Plate.
Rubber mounted Oil Tank with center fill oil cap hole.
Fork Stop Plate with two different mounting positions
for your choice of turning radiuses (requires flat
type lower fork bracket).
1 3/4" O.D. backbone made from .188" wall
DOM steel.
1 3/4" O.D. single downtube made from .188" wall
DOM steel.
1 1/4" O.D. cradle & tail section made from
.120" wall DOM steel.
TIG welded construction.
Fits 330mm tire with rear chain, 300mm tire with belt.
Required Components:
Right Side Drive Softail Type Transmission.
10 1/2" wide Right Side Drive Rear Wheel designed
for a 1" O.D. axle.
Custom left side mounted Rear Brake designed for a
1" O.D. axle.
Custom flat type Lower Fork Bracket suitable to mount
the slotted Fork Stop Plate to.
1986/1999 Softail style Forward Controls.
12 1/2" wide Rear Fender and Supports.
Custom fabricated Seat, Gas Tank and Exhaust. |
